The construction industry is full of risks and hazards. As we know that construction projects are a series of tasks that required heavy-duty machines and unsafe methodologies. Occupational Safety and Health Association (OSHA) has already set some measures to work under such conditions. All these regulations need to be followed by each working on the construction site to avoid any unpleasant events. The accidents may be seen due to the falling debris, unprofessional handling of the equipment, electrical, or other severe events.
Several times, the heaviest objects need to be hoisted up to a certain height. for this purpose, the heavy construction machines are there to help. They are efficient enough to hoist and lift the objects along with the workers so that the workers can perform their job easily. The risk of having this equipment is unavoidable. One cannot neglect even a slight factor that may cause the accidents. For every construction equipment be it cranes or used bulldozers for sale, it is mandatory to follow the safety guidelines.
In this article, we are going to give you some useful safety tips to avoid the hazards of hoisting and rigging at the construction site which may endanger the lives of many personnel, otherwise.
What is hoisting and rigging?
Before getting deep into the information, we need to understand what actually, these terms mean. In simple terminology, hoisting means lifting a person to a certain height with the help of some equipment and tool. The equipment may be a crane or an articulated boom lift that has a bucket to carry the person along with the load so that they can easily work on the outer wall of the building. On the other hand, rigging means all those assemblies that are used to carry the heaviest object including ropes, strings, cables, and others. The hazards of rigging and hoisting may be fatal for the person who is operating the tools or equipment and for the person standing right under them. It is not necessary that only the working person will be affected. Sometimes the event may go off the road and it may hit others who are not even involved in the process. So, it is very necessary to be very cautious while working along with this machinery on the construction site.
These are some common hazards of hoisting and rigging and some tips to avoid them.
Slip-off from the height
When a worker is standing in the bucket and working on the top of the building, then there is a maximum chance of slipping toes from the edges. In this case, the worker may lose his balance and fall off to the ground. It may moderately to severely injure him. If any other person is standing under the bucket, then he may also get trapped in this accident.
To avoid this kind of accident, always try to wear all the personal protective equipment like a helmet, and boots, and use a safe and secure bucket. Further, make sure that all the irrelevant people are staying away from the site.
Exposing to Electrical hazards
Electrical hazards are another most common risk in this thread. In some construction areas, overhead electrical lines are installed that may create a problem for the workers who need to work on the height. there is a maximum probability that the lifting ropes get entangled with those electrical wires and cause accidents.
To avoid such conditions, it is mandatory to do a pre-inspection of the site and then start working there. Try to avoid those areas or ask the electric supply companies to cut off the electric supply for that particular area if possible. Otherwise, keep a safe distance from those high conducting electrical wires. Furthermore, the workers need to be trained enough to work under such conditions and must know all the hazards of electric wires.
Falling other materials
It is another most common hazard that may happen during hoisting and rigging. It is most probable that some of the heaviest objects may fall due to the loose holding of the ropes, hook, or beam. The falling object may hit the workers working under the machine or it may also hit the ground. In both cases, the harm will be severe. The damage can be counted by the distance from which the object falls. Higher the distance, the larger the damage.
To prevent these kinds of accidents, it is important to keep the people away from the site. You can also install a net around the site to catch the falling objects before hitting the ground.
Unstable lifting equipment
One of the main causes of getting accidents during hoisting and rigging is unstable equipment. If the equipment which is used for hoisting and rigging the weight is not balanced, then it will trip off while lifting the weight. It may cause the same damage as the falling object. Further, it may also harm the operator as the entire equipment may fall.
You may avoid such conditions by ensuring that the equipment is balanced and has no hurdle in between its route. The pre-inspection will help you to achieve a safe operation.
It is the device that helps the worker to hold on to the height. If the harness is defective, it will cause an accident. The person may fall from the height and get injured. If the harness is not set properly then the worker may also get pulled into the machine and it will mangle them severely.
To avoid this accident, make sure the harness and all the other parts a properly working. If any crack or a small sign of damage is seen, immediately repair them or replace the equipment. Further, make sure all the workers or other equipment like used bulldozers for sale are not in the way.
Hoisting and rigging are common practices in the construction industry. however, slight negligence in its operation may cause fatal injuries during the job. To avoid such accidents, you need to be very careful and assure pre-inspection. In this article, you will get all the common hazards that may occur on the site and tips to avoid them as well.